DERMA LASER
the bestselling Erbium: YAG laser worldwide
The MCL31 Dermablate is the gold standard when it comes to highly precise ablation and fractional technology. The device allows the safe and gentle removal of a variety of benign lesions of the epidermis and dermis. It provides effective treatment for wrinkles and scars without any thermal damage to the skin.
Erbium:YAG laser: the gold standard for dermatological treatments
The MCL31 Dermablate Erbium:YAG laser ablates the skin with a degree of precision that can be measured in microns and can be carried out as a fully ablative or fractional process. This allows to safely and gently remove a wide variety of lesions from the skin at epidermis and dermis level and an effective skin rejuvenation. Its reliability and effectiveness have been proven worldwide.
The wavelength of 2,940 nm of the Erbium laser matches the maximum peak of water absorption (water is the main component of the skin). The energy is therefore entirely used for the rapid vaporization of the water in the tissue, which leads to the almost instant ablation of tissue. Due to its characteristics, the MCL31 Dermablate has a significantly shorter healing time compared to a CO2 laser (time for re-epithelialization, erythema, edema). On the other hand, the CO2 laser results in better haemostasis thanks to coagulation.
Thanks to the greatly limited thermal effects of the Erbium laser, the procedure is less painful than with CO2 lasers. Patients do not require any anaesthesia in the treatment of small lesions. Side effects and risks are greatly reduced with this laser. The safety of this treatment makes the Erbium laser the superior choice for delicate areas such as the periorbital region or even the neck, chest and hands.
Integrated smoke evacuation system with triple-filter system
The patented handpiece design guarantees an effective and simultaneous aspiration of the ablated particles, at the same time as the emission of the laser light which is activated by the footswitch. No additional switch is needed and noise is kept to a minimum. This also means that physicians no longer have to purchase a supplementary device or have an assistant present to hold it during treatment.
VarioTEAM handpiece with adjustable spot size directly on the handpiece
Another Asclepion innovation is the ease with which physicians can now vary the spot size (from 1 to 6mm), simply by turning a ring on the handpiece. The machine automatically recognizes the change and the laser is immediately ready for use, ensuring considerable time savings and a high degree of user-friendliness.
Adjustable pulse length
The MCL31 Dermablate is the first Erbium: YAG laser to allow the pulse length to be changed. Thanks to this feature you can work with both extremely short pulses, which guarantee a highly precise “cold ablation”, and with longer pulses “hot ablation” (up to 1000 ms) for a thermal effect on the tissue. The “cold ablation” is particularly suited for purely ablative treatments (for example for the removal of dermal and epidermal lesions) while the “hot ablation” is recommended for rejuvenation treatments, as it effectively stimulates nucleogenesis. The two modes can also be combined, for example in the fractional rejuvenation treatments (where the thermic effect on the collagen can be added to the ablative effect on deep wrinkles) and in the removal of lesions located in the dermis (coagulation mode).
“Coagulation mode” keeps the treatment area free and clear
Thanks to the thermal mode, the laser MCL31 Dermablate offers the ability to limit any bleeding during ablation treatments with a simple gesture. With this function it is possible to change the mode on the work screen from ablative to thermal in an instant; this causes an instantaneous coagulation and allows the physician to curb pinpoint bleeding that can occur when working in the deeper layers of the dermis (e.g. in the removal of dermal lesions). In this way the treatment area remains clean and visible during the entire treatment, allowing the operator to work quickly, safely and effectively.
New display
The clear and sharp display with touch-sensitive buttons and a user-friendly interface allows an intuitive and pleasant working environment for an optimal treatment procedure. The three treatment modes (Ablation, Therm, MicroSpot) are optimized specifically for the applications.
The MCL31 Dermablate can be upgraded with the following optional items:
VarioTEAM XL handpiece with adjustable spot size of 8-12 mm
In addition to the standard handpiece, you can also choose the VarioTEAM XL Handpiece, which allows you to adjust the spot sizes starting from 8 up to 12mm – for the rapid treatment of larger lesions.
MicroSpot handpiece with adjustable cover rate
The MicroSpot handpiece features a special micro lens array with a 13 x 13 mm spot (169 MicroSpots) and is used for fractional skin ablation treatments, such as fractional skin rejuvenation. This optic allows the selective treatment of only “fractions” of the tissue in the form of a grid. This is made possible by splitting the laser beam into several hundred partial rays. This triggers skin renewal and collagen formation with rapid wound healing, which is supported by the untreated skin and therefore involves a very low risk of side effects. Thanks to an exclusive micro lens array, the MicroSpot technology provides a unique level of precision. The cover rate can be set directly on the handpiece by rotating the ring. This increases flexibility and enables even better treatment results in fractional laser therapy.
Steri-Spot handpiece: upgrade to Juliet, the feminine laser
The Steri-Spot Handpiece widens the application field of the MCL31 Dermablate, offering the possibility for intravaginal treatments to be carried out, such as the treatment of Vaginal Relaxation Syndrome (VRS), Vaginal Atrophy and Stress Urinary Incontinence (SUI). Discover more about Juliet – the feminine laser.
CUT handpiece
The CUT handpiece extends the application range of the MCL31 Dermablate and offers for the first time worldwide the possibility of cutting with an Er:YAG laser.
Special footswitch “TuneSwitch”
The MCL31 Dermablate is the first laser to feature a special footswitch that allows the physician to adjust the fluence/the repetition rate without the need to touch the device screen, to ensure an efficient workflow.
Covering a large range of treatments
Skin Ablation
Skin Rejuvenation
Scar Treatments
Stretchmark Treatments
Pigmentation Removal
Intravaginal Treatments
Snoring Treatments
Head office:
(011) 973 0075
info@laseraestheticssa.com
Laser Aesthetics South Africa Building, 17 B Bradford Rd, Bedfordview, Germiston, 2007
South Africa
Coastal Branches:
Cape Town & Durban
(071) 138 4000
Coastal Branches:
Cape Town & Durban
(071) 138 4000